Home >
Products >
Peripherals
|
|
PC/104
Peripherals
for Embedded Systems
|
|
| |
Our line of PC/104 peripherals boards offer maximum functionality at minimum cost. The PC/104 bus and connector allow you to easily add features to your single board computer by stacking feature specific daughter cards. Features that can be added through the PC/104 bus include wide-range wireless interfaces, multiple 10/100 ethernet ports, CAN bus, GSM and line modems, extra I/O lines, ADC channels, VGA video, Power-over-Ethernet, serial ports and more. If you don't find the exact features you need in our COTS peripheral product line, consider a custom PC/104 peripheral design to suit your embedded application. Our team of engineers have the experience to modify existing products or design a completely custom peripheral board, often at a lower total cost than an in-house design. Contact an engineer for more information.
Plan your peripheral stack: All our peripherals use PC/104 stack-thru connectors. Some peripherals have a PC/104 bus with a 64 pin connector, some have a PC/104 bus with a 104 pin connector. If you are going to use 64 pin peripherals stacked with 104 pin peripherals, you will need to have an embedded computer with the 104 pin PC/104 bus. Stack the peripheral with 104 pins closest to the embedded PC, and stack the 64 pin peripherals above the 104 pin peripherals. The TS-12W power module can only be stacked on top. When purchasing peripherals, check the pin count on each peripheral and plan your PC/104 stack.
| |
Power Supply and Memory -
PC/104 Peripherals Boards and Daughter Cards
|
 |
 |
|
|
- Power-over-Ethernet Splitter
- Integrated 10/100 Ethernet Port
- 2.4 amp @ 5V (12W)
- Wake-on-LAN integrated with PoE
- Programmable sleep modes
|
- Linux driver and utilities available
|
|
|
|
|
 |
|
|
 |
|
|
|
- 1 MB or 2 MB
- Standard 5V power only
- True battery-backed SRAM
- Unlimited write cycles
- Fast 150nS read or write cycles
|
- 10 year lithium battery
- Write protection if power < 4.25 VDC
|
|
|
|
|
|
|
|
|
|
|
|
- Up to 512KB battery-backed SRAM
- Eliminates wear-out failure
- Eliminates write cycle latency
- 10 year lithium battery
- Power Requirement < 1mA
|
|
|
|
|
|
|
|
|
|
|
|
|
- Regulated +5 VDC via PC/104 bus
- Up to 2.4 Amps @ +5 VDC
- 10-40 VDC reverse polarity protection
- Designed for noise reduction/immunity
- High-efficient/Low-heat Switching Power
|
- Lockout circuit for VIN < 10 V
|
|
|
|
|
|
|
|
|
|
|
|
- Guarantees controlled SBC shutdown
- NiMh rechargeable batteries
- 1000 mA-hour of 5V power
- Sleep mode w/ programmable wake-up
- Powers SBCs for days in low-duty cycle
|
- 5 VDC or unregulated 8-28 VDC power
- Linux drivers and utilities available
|
|
|
|
|
|
|
|
|
|
|
|
- IDE Compact Flash socket
- Hot-Swapping supported
- Up to 4 TS-RF2-CF in a system
- Linux Drivers included
|
|
|
|
|
|
|
|
|
|
|
Network Communication -
PC/104 Peripherals Boards and Daughter Cards
|
|
|
|
|
- Supports all MultiTech Modems
- Uses 16C550 UART w/ 16 byte FIFOs
|
|
|
|
|
|
|
|
|
|
|
|
|
- 33.6K v.34 modem
- Uses standard AT-style commands
- AutoDial and AutoAnswer features
- Uses 16C550 UART w/ 16 byte FIFOs
- NVRAM for storing user settings
|
|
|
|
|
|
|
|
|
|
|
|
|
- Standard 16C550 COM port interface
- Standard speeds, up to 115.2 Kbaud
- 230 Kbaud supported in x2 mode
- GSM SIM card socket
|
|
|
|
|
|
|
|
|
|
|
|
|
- 10 Mbps CS8900 ethernet
- LEDS indicators for link and activity
- Header for external LED hookup
- DOS, Linux, NetBSD drivers available
|
|
|
|
|
|
|
|
|
|
|
|
|
- 10/100 Ethernet Port
- Jumper selectable I/O and IRQ
- PC/104 Dimensions 3.6 x 3.8 inches
- Wake-on-LAN
- Linux driver and utilities available
|
|
|
|
|
|
|
|
|
|
|
|
|
- Two 10/100 Ethernet Ports
- Jumper selectable I/O and IRQ
- PC/104 Dimensions 3.6 x 3.8 inches
- LEDS indicators for link and activity
- RoHS compliant
|
- Wake-on-LAN
- Linux 2.4 and 2.6 drivers available
|
|
|
|
|
|
|
|
|
|
|
|
- Philips SJA1000 CAN controller
- Opto-isolated CAN interface
- Up to 1 Mbps bit rate
- Linux Drivers included
|
|
|
|
|
|
|
|
|
|
|
|
|
- Uses Aerocomm AC4790 transceiver
- Up to 4 mile range (line of sight)
- 902-928Mhz frequency band
- Up to 76.8kbps raw data rate
- 100mW transmit power (200mW EIRP)
|
|
|
|
|
|
|
|
|
|
|
|
|
- Uses XBee Pro transceiver module - IEEE 802.15.4/Zigbee compliant
- Up to 1 mile range (line of sight)
- 2.4Ghz frequency band
- Up to 250kbps raw data rate
- 60mW transmit power (100mW EIRP)
|
- Linux Drivers included
- Optional Compact Flash socket
|
|
|
|
|
|
|
|
|
|
Serial Communication -
PC/104 Peripherals Boards and Daughter Cards
|
|
|
|
|
- 1 PC/AT Serial COM Port
- 16550 UARTs w/ 16 byte FIFOs
- Up to 115.2Kbaud
- Power 20mA @ 5V
|
|
|
|
|
|
|
|
|
|
|
|
|
- 2 PC/AT Serial Com Ports
- 1 PC/AT Parallel Port
- 16550 UARTs w/ 16 byte FIFOs
- Up to 115.2Kbaud (optionally 230Kbaud)
- RS232 drivers standard
|
|
|
|
|
|
|
|
|
|
|
|
|
- 4 PC/AT Serial COM Ports
- 16550 UARTs w/ 16 byte FIFOs
- RS-232 available on all 4 ports
- RS-485/RS-422 available on 2 ports
- Up to 230 Kbaud
|
|
|
|
|
|
|
|
|
|
|
|
|
- 2 PC compatible 16550 UARTS
- Opto-isolated RS-485 drivers
- Isolation Voltage = 1500V
- Transient and Surge suppression
- Full duplex operation
|
|
|
|
|
|
|
|
|
|
|
Data Acquisition -
PC/104 Peripherals Boards and Daughter Cards
|
|
|
|
|
- 16 channels 16-bit ADC
- ADC Sampling rate up to 2x100ksps
- 512x16bit RAM-FIFO for ADC data
- 4 digital inputs - 0 to 5V
- 1 digital output - 0 to 3.3V/50mA
|
- 4 12-bit DAC channels
- 4 16-bit counters
- Jumper selectable I/O an IRQ
- Linux drivers available
|
|
|
|
|
|
|
|
|
|
|
|
- 24 channels 12-bit ADC
- Sampling rate up to 2msps
- Takes 4 samples simultaneously
- Internal 512x16bit RAM-FIFO
- Jumper selectable I/O and IRQ
|
- PC/104 Dimensions 3.6 x 3.8 inches
- RoHS compliant
- Linux drivers available
|
|
|
|
|
|
|
|
|
|
|
|
- Eight independent SPDT relays
- Software controlled
- 40mA draw per coil
- Jumper selectable I/O address
- Works with any PC/104 SBC
|
|
|
|
|
|
|
|
|
|
|
|
|
- 8 channel 12-bit ADC
- 0.2% Analog Reference
- Optional 4 channel 12-bitDAC
- 8 separate jumper selectable I/O
|
|
|
|
|
|
|
|
|
|
|
|
|
- 24 Digital I/O points
- Opto-22 compatible interface
- 4 dedicated 48 mA ouputs
- 4 dedicated 1 Amp outputs
- 16 programmable I/O points
|
|
|
|
|
|
|
|
|
|
|
|
|
- 32 Digital Inputs, 0-30V range
- 32 Digital Outputs, up to 40V
- 2.1V threshold for inputs
- 200/400 mA sink per output
- 34 Pin ribbon cables w/ locking
|
|
|
|
|
|
|
|
|
|
|
Multi Functional -
PC/104 Peripherals Boards and Daughter Cards
|
|
|
|
|
- 16-bit color, 640X480 resolution
- 8MB dedicated video memory @ 95Mhz
- Simple and fast video accelerator
- Accelerated Linux framebuffer driver
- 24 (16 out, 8 in) 5V tolerant GPIO
|
- 5 megabaud serial port
- Optional RS485, half or full-duplex
- Optional 8 channel 200ksps 16-bit ADC
- Optional SJA1000-CAN controller
|
|
|
|
|
|
|
|
|
| | |
